Westek
  • Home
  • Power Quality
    • VSD Filters
    • RFI Filter / EMC Filter
    • Passive Harmonic Filter
    • Active Harmonic Filter
    • Line Reactors / Load Reactors
    • Voltage Stabilisers and UPS
    • Surge Protection Devices
    • Motor Output Filters
    • Motor Protection Filter
    • Power Factor Correction Devices
    • Switchboard Accessories
    • EMC Components
  • Test Equipment
    • DC Power Supplies Rack Mount
    • DC Power Supplies Bench Top
    • AC Power Supplies
    • EMI Receivers
    • Power Supply Modules
    • EMC Test Equipment
    • Frequency Converters
    • Hipot Safety Testers
    • RF Amplifiers & RF Test
    • Power and Energy Analysers
    • Handheld Test Equipment
    • Benchtop Test Equipment
    • Electrical Engineering Test
    • Electronic Loads
    • Oscilloscopes
    • Signal generators
    • Device Programmers
  • Power Electronics
    • Power Semiconductors
    • Variacs
    • OEM Power Supplies
    • Drives
  • About Us
    • Brands we work with
    • News
  • Contact

News

Home » News

Westek and Our Suppliers

At Westek we work with the best suppliers in the industry, and we think you should too. We take great pride in working with some of the world leaders in the industry. Some of our major suppliers such as Schaffner,…
  • Permalink
  • Posted: September 2, 2014
  • Categories: Articles
  • Tags: power supply, suppliers, test equipment, westek

Wireless Power Transfer – The Future of Electronics

Würth Elektronik is paving the way in the wireless power transfer research. Würth Elektronik is an innovative company and always strives to provide complete solutions to help customers to understand new technology in an easy way. In May this year…
  • Permalink
  • Posted: August 11, 2014
  • Categories: Uncategorized
  • Tags: westek, wireless power transfer, wurth

The Importance of High Quality Test Equipment

Test equipment is an essential tool used in most industries. Electronic test equipment is used to create signals and capture responses from electronic Devices Under Test (DUTs), to ensure the DUT is working properly and possible faults can be detected.…
  • Permalink
  • Posted: July 18, 2014
  • Categories: Articles
  • Tags: electrical engineering, test equipment, westek

New DC-DC Converter from Powerstax

The new Powerstax ND0111 DC to DC converter is suited to a wide range of tasks and in particular for rolling stock, providing full isolation for primary as well as secondary from ground. The Powerstax ND0111 provides 12 volt DC…
  • Permalink
  • Posted: July 7, 2014
  • Categories: News
  • Tags: DC-DC Converter, westek

Harmonics will cost you money unless you plan for them

By Sandeep Patel The results of not assessing loads correctly can be very costly to the contractor required to bear the cost for correcting the harmonics contribution, generally to comply with AS/NZS point of common coupling (pcc) harmonic voltage distortion…
  • Permalink
  • Posted: June 30, 2014
  • Categories: Articles
  • Tags: harmonic filters, westek

Adaptive-Passive Harmonics Filters by Westek Electronics

MTE’s unparalleled “adaptive passive technology” makes the Matrix AP Harmonic Filter the most advanced harmonic filter on the market. No other harmonic filter exhibits active filter characteristics in a passive filter topology with improved power factor and energy efficiency. With…
  • Permalink
  • Posted: February 4, 2014
  • Categories: News
  • Tags: harmonic filters, westek

TSi AC Voltage Regulators

Where should TSi voltage regulators be used? Soft supply–problematic tap changing in distribution transformers The TSi voltage regulators should be used in areas of soft (high impedance) supply systems and also in areas where distribution transformer tap changers cannot keep…
  • Permalink
  • Posted: February 4, 2014
  • Categories: News
  • Tags: TSi VRP Regulators, voltage regulators, westek

PMM appoints Westek for compliance equipment

Westek Electronics has been appointed by PMM to market and sell its range of EMC and RFI equipment. PMM is a major company within the global L3-Narda group and is based in Italy. PMM specialises in receivers and spectrum analysers,…
  • Permalink
  • Posted: November 6, 2013
  • Categories: News

PMM 9010F fast, digital EMI receiver

The new PMM 9010F FFT Time –Domain Digital EMI receiver and Real-Time Analyser with FFT for full emission compliance is suitable for laboratory use and field work (only 4.3 kg weight) via its standard Li-ion battery pack. Because of fast analysis…
  • Permalink
  • Posted: November 6, 2013
  • Categories: News
  • Tags: Domain Digital EMI receiver, PMM 9010F, Real-time analyser, westek

Multi-standard, single path LISN

The new PMM L1-150M Multi-Standard LISNs now provide for the first time line impedance stabilisation networks for conducted RFI in the range of 10 kHz to 400 MHz, thus making EMC testing simpler and less costly. The LISNs are suitable…
  • Permalink
  • Posted: November 6, 2013
  • Categories: News
  • Tags: EMC Testing, Multi-Standard LISN, westek
← Previous12345Next →
Product Enquiry

Your Name*

Company

Your Email*

Phone*

Your Message

Contact Us
  • 51 Latitude Boulevard, Thomastown VIC 3074
  • 03 9464 1300 (BH) / 0432 558 866 (AH)
  • info@westek.com.au
Our Major Suppliers
Slide background
Slide background
Slide background
Slide background
  • Home
  • Power Quality Equipment
  • Test Equipment
  • About Us
  • Contact
  • News
  • Sitemap
  • 51 Latitude Boulevard, Thomastown VIC 3074
  • 03 9464 1300 (BH) / 0432 558 866 (AH)
  • info@westek.com.au
Stay Connected
  • Facebook
  • Google
Westek Electronics © 2014 . Powered by Digital Unicorn Pty. Limited