| |
|
| |
| |
|
|
| |
|
Point of Contact 3 - June 2010 (1/6/2010)
Feeling the winter chill ? Grab a hot steaming cup of coffee, while we take you through some of our new products. We believe in sharing as much industry information with our customers and peers as possible. ...more  |
| |
|
Point of Contact 2 - December 2009
(14/12/2009)
Our first paperless newsletter
reflects the demand of the times we live in - a time when we
should not be wasting precious resources. Appropriately the
first topic deals with solar power products that Westek
Electronics is now promoting..
...more
 |
|
|
DC Power Supply is LXI-compliant
(3/07/2009)
The new Sorensen Series XEL-P DC linear
power supplies are ideally suited to bench
work as well ATE tasks. The Sorensen Series
XEL-P DC linear power supplies are
characterised by extremely low ripple (0.4
mV rms) and user-friendly, lockable analogue
controls.
..
...more
 |
|
|
Power Quality Analyzer monitors and controls
(2/07/2009)
The new Janitza, DIN-rail
mounting, UMG 511 Power Quality
Analyzer is capable of providing
24/7 continuous monitoring and
analysis of single and three-phase,
three and four wire networks in
accordance with EN 50160. The
Janitza UMG 511 Power Quality
Analyzer can be employed as a form
of protective relay as well an
Ethernet gateway in hierarchical
analysis and control networks.
..
...more
 |
|
|
RF field meter covers spectra to 18 GHz
(15/06/2009)
The Smart Fieldmeter Digital (SFD) electromagnetic field monitor is a battery-operated instrument/data logger capable of 55 hours measurement operation with primary or rechargeable cells.
...more
 |
|
|
Power Factor Correction capacitor banks
(15/06/2009)
Power factor correction
capacitor banks from Janitza
Electronics, suitable for LV
three-phase power distribution, are
now available complete with detuning
chokes, discharge resistors,
internal busbar system, and HRC
fusegear.
...more
 |
|
|
DC power supply from Sorensen has high power ratings
(10/06/2009)
Sorensen SG Series power supply systems now available from Westek Electronics provide wide voltage and power output ratings for a wide range of applications including process control, automotive component testing and ATE systems.
...more
 |
|
|
Wurth ESD suppressors
(13/05/2009)
A new range of Würth ESD suppressors is available for applications including devices for portable electronics such as PDA’s, MP3’s, mobile phones, antennas, VGA’s, USB and IEEE ports, LAN’s, etc.
...more
 |
|
|
EMI Filter for PV Inverters
(15/04/2009)
The new Schaffner FN 2200 DC EMC/EMI Filter
series for photovoltaic panels are designed
to prevent conducted RF from the inverter
thus significantly reducing the
potential for radiated emission with
the PV panels and wiring acting as
antennas. .
...more
 |
|
|
Monitoring electric, magnetic, near and far electromagnetic fields
(1/04/2009)
This short technical note describes an electric, magnetic and electromagnetic field analyser suitable for a very wide range of applications. The instrument, the TAOMA field analyser is capable of measurements from 15 Hz to 30 MHz by switching probes that are supplied with this single instrument as standard.
...more
 |
|
|
LISN for Automotive EMC testing
(30/03/2009)
Westek Electronics announces the release
of the new Langer NNB21 Line Impedance
Stabilisation Network (LISN) suitable for
automotive conducted interference testing in
accordance with CISPR 25/ISO 7637. The
standard is applicable to OEM device
conducted emission testing including capture
of pulses down to the nano-second level.
...more
 |
|
|
IGBT modules
from Westek Electronics
(12/01/2009)
The new Dynex IGBT
modules available from Westek
Electronics cover a large number of
applications including uni-directional
and bi-directional switching,
chopper, dual and single switching,
as well as half-bridge operation...more
 |
|
|
Solid state broadband 0GHz RF amplifier
(7/10/2009)
for wide-band communications requiring receive/transmit functions in CW/AM/FM/PM and pulse modes. It is available from Westek Electronics Pty Ltd. The 5303068A amplifier has exceptionally low noise power (kTB where k is Boltzman's constant, T ...more
 |
|
|
Dynex IGBT modules available from Westek Electronics
(1/13/2009)
Dynex IGBT modules, available from Westek Electronics, cover a large number of applications including uni-directional and bi-directional switching, chopper, dual and single switching, as well as half-bridge operation. Operating voltages are ...more
 |
|
|
Conductive EMI Shielding Gaskets
(1/9/2009)
Conductive EMI Shielding gaskets; conductive EMC shielding stampings; conductive foam; conductive nylon weaves; woven EMI shielding strings; RFI shielding sheets and tapes; earthing cable connectors, earthing EMI belts and straps; flexible absorber EMI ferrite sheets....more
 |
|
|
Schaffner NEMP & Tempest EMI Filter Applications
(12/9/2008)
Specially designed, three-stage EMI filter for military applications, meeting highest attenuation requirements from a few kHz to 5 GHz. EMP and NEMP requirements are met through EMC filter surge suppression circuitry including gas discharge tubes....more
 |
|
|
Schaffner Pulse Transformers
(9/9/2008)
A Schaffner pulse transformer can provide excellent galvanic isolation for driving IGBTs, firing thyristors, triacs, power MOSFETs, DC-to-DC converters and data transmission circuits....more
 |
|
|
Zymax Surge Protection
(8/22/2008)
The Zymax range of high energy rated surge suppressors encompasses power shunt protectors suitable for 240 volts single-phase supplies, combination surge suppression and RFI filter units also suitable for single-phase 340 volt supplies; three-phase surge protection barriers, as well as surge protection devices for field mounted process control devices, data cables, video and CCTV protection, and aerial protection....more
 |
|
|
Power electronics components from Westek Electronics
(8/18/2008)
Electronics offer a large range of power electronics components, which are suitable for demanding applications of high frequency and high current.The devices include the following: Power semiconductors Pulse transformers Power ...more
 |
|
|
Westek Electronics launches new power analyser
(8/1/2008)
new Voltech PM 1000+ precision power analyser from Westek Electronics is suitable for single-phase power and energy measurement of power circuits, industrial and domestic appliances, linear and switch-mode power supplies and can also be used ...more
 |
|
|
Prodigit 3311D Series DC Electronic Load
(7/14/2008)
Prodigit recently released a range of multifunction DC Electronic Loads including the 3311D 300W Electronic Load. Capable of sinking up to 60 amps and a maximum voltage of 60V DC the applications are many, including:...more
 |
|
|
Schaffner EMI filters available from Westek Electronics
(7/11/2008)
Electronics offer Schaffner EMI filter, which is designed for fast chassis mounting and has good RFI attenuation properties because of the use of high saturation chokes.They can be provided with surge protection for critical EMC filter ...more
 |
|
|
Power Quality Monitoring Relays
(6/4/2008)
The new Power Standards Laboratory PQube DIN-rail mountable power and disturbance monitoring relay captures voltage disturbances and time-stamped waveforms, storing captured information on a plug-in 4 GB SD card that provides exportable CSV Excel-compatible and GIF picture files....more
 |
|
|
Connectors
(12/12/2007)
A large range of connectors and connection systems suitable for printed circuit boards are available:...more
 |
|
|
Dielectric analyser
(12/1/2007)
associated with arcs, distinguishing these from leakage current and therefore permits the flagging of unsafe devices.Westek Electronicswww.westek.com.au03 9369 ...more
 |
|
|
Tester
(12/1/2007)
of up to thirty individual steps. Instrument options include a GPIB and RS232 interface as well as a printer port.Westek ...more
 |
|
|
Westek Electronics unveils programmable power supply
(10/5/2007)
Motech PPS 3210 programmable power supply, available from Westek Electronics, is a high resolution (16 bit) system with three channels providing 0 to 30 V DC (channels 1 and 2, with 90 watt rating), and 0 to 15 V DC (channel 3) with a 30 watt ...more
 |
|
|
MTE Sine Wave Filters
(9/30/2007)
The MTE series A sine wave filters provide a smooth sine wave voltage output for variable speed drives. The filters are suitable for PWM modulated inverters with switching speeds between 2 and 8 kHz....more
 |
|
|
Westek Electronics introduces FN 9233 IEC inlet filters
(8/30/2007)
new Schaffner FN 9233 IEC filters from Westek Electronics provide a rapid solution for attaining effective EMC compliance utilising a small form factor component.The filters are suitable for 250 volts single-phase operation and for line ...more
 |
|
|
IEC inlet filter introduced by Westek Electronics
(8/3/2007)
Schaffner FN9263 series IEC-inlet filters introduced by Westek Electronics are ideally suited to 1-U form factor equipment.These inlet filters are designed for many applications including household goods test and measurement and ...more
 |
|
|
Programmable DC sources
(5/31/2007)
The Motech power supplies can be operated via a rotary as well as keypad controls, or remotely via SCPI protocol.Westek Electronics Pty Ltd03 9369 ...more
 |
|
|
KoCoS EPPE W8 Power Quality Analyser with IP 65 Protection
(5/5/2007)
The EPPE W8 Power Quality Analyser is a Power Quality Analyser of robust design which has been specially developed for use in harsh environmental conditions. The shock-resistant housing complies with IP65 and is therefore fully protected against dust and water jets....more
 |
|
|
Powerstax Modular DC & AC Power Supplies
(3/12/2007)
Powerstax provides standard and custom AC & DC power solutions for centralised and distributed power (DPA) in a broad range of applications including hot swap front end AC-DC bulk power, DC-DC converter bricks and programmable, modular rack mounted Power Supplies, for use in Telecoms, Datacoms, IT, Industrial, Test & Control, Transportation, Avionic, Defence, Medical and all commercial markets....more
 |
|
|
Economic New ESD gun from Westek Electronics
(3/10/2007)
new Teseq NSG 437 (formerly Schaffner Test Systems) available from Westek Electronics is economic and easy to use.The basic instrument features air and contact discharge with voltages ranging from 200 volt to 30 kilo volts.The NSG 437 ...more
 |
|
|
The Voltech PM 6000 Multi Phase Power Analyser
(3/3/2007)
The PM6000 Multi Phase Power Analyser is ideal for making measurements of electrical power on any electrical or electronic product. From low-power standby measurements on wall chargers, through domestic and office equipment to high-power traction power electronics, the PM6000 Multi Phase Power Analyser will make reliable and accurate measurements every time....more
 |
|
|
Voltech PM1000+ Power Analyser
(1/23/2007)
The Voltech PM 1000+ precision power analyser is suitable for single-phase power and energy measurement of power circuits, industrial and domestic appliances, linear and switch-mode power supplies and can also be used to measure inrush parameters under zero-crossing or peak values (utilising the Voltech PS 1000 Inrush Switch)....more
 |
|
|
Combined ac and dc power supply
(12/9/2006)
available with single or three phase outputs, and the 90 and 135kVA are available as three-phase only.Available from Westek Electronics, the MX series provides full ac power and dc power up to 65% of ac ratings.The MX series 15 and the ...more
 |
|
|
New single-phase filters
(12/7/2006)
newly introduced FN 2030-single stage, and FN 2090 two stage, single-phase EMC filters from Westek Electronics are available in a finely graduated range of currents to suit specific design requirements. The chassis-mounting filters are ideal ...more
 |
|
|
Applied Power Systems Semi-conductor Devices & Rectifier Assemblies
(10/2/2006)
The products include leading edge, high technology, power semiconductor solutions for power stages and gate driver boards, such as high power inverter, converter and AC Phase Control Power Stages as well as Gate Driver Circuits for IGBT, SCR and MOSFET devices, fibre-optic interfaces, high voltage drivers for IGBTs and SCRs, Snubber boards, etc. In addition, a complete line of high power semiconductor assemblies and rectifier bridges is available....more
 |
|
|
Dc loads suitable for high currents
(9/20/2006)
of 120 amps to 360 amps.Applications include SMPS transient response testing, and battery testing.Available from Westek Electronics, the Prodigit 3350 series loads are readily incorporated into ATE systems.The Prodigit loads can ...more
 |
|
|
Elastomer tape with diverse uses
(9/19/2006)
little if any outgassing, atypical total volatiles level being less than 0.5% at +200°C.Tommy Tape is available from Westek Electronics in rectangular and low-apex cross section, with the latter version ideal for spiral taping ...more
 |
|
|
EMC filter for critical and NEMP applications
(9/18/2006)
source and output impedance, symmetrical insertion loss is well in excess of 80dB to 3GHz and beyond.Available from Westek Electronics, the filters are available in current ratings of 6, 10, and 20 amp at temperatures of 40°C.NEMP ...more
 |
|
|
Motech MT4080A LCR Meter, Hand Held
(9/10/2006)
The MT4080A LCR Meter is the first handheld meter of this type on the market, with a wide range of test frequencies up to 100KHz and many measurement parameters including Z, L, C, DCR, ESR, D, Q, and Theta as well....more
 |
|
|
Combined ac and dc power supply
(8/31/2006)
available with single or three phase outputs, and the 90 and 135kVA are available as three-phase only.Available from Westek Electronics, the MX series provides full ac power and dc power up to 65% of ac ratings.The MX series 15 and the ...more
 |
|
|
EMC presentation on automotive systems
(7/25/2006)
on copper looms, thus creating unique challenges in the simulation of transient interference phenomena. He is visiting Westek Electronics Pty. Ltd. (www.westek.com.au) which is a corporate sponsor of the EMC Society.This meeting is open EMC ...more
 |
|
|
Full-featured DMM with USB port
(7/25/2006)
new Picotest M3500A six and a half digit DMM with USB port and optional 10 channel scanner card from Westek Electronics Pty Ltd is suited to R&D, scientific as well production and service tasks. The Picotest M3500A measures AC and DC ...more
 |
|
|
Seminar for automotive systems suppliers
(7/24/2006)
(Victoria) will host Timothy Horacek, EMC Product Specialist with Schaffner EMV AG, in Melbourne, as announced by Westek Electronics Pty Ltd.Mr Horacek, who has extensive international experience in immunity testing for automotive electronics, ...more
 |
|
|
Power quality relay
(7/14/2006)
or phase-to-phase monitor suitable for a large range of industrial control applications and was developed by Westek Electronics.Three relays can be employed for the comprehensive monitoring of a three-phase circuit. The PQ1 detects sags, ...more
 |
|
|
Powerful phase control thyristors
(7/14/2006)
new Powerex TCS4_340H disc-pack, phase control thyristors from Westek Electronics are characterised by extremely low peak on-state voltage (<1.34 volts), high current rating of 3400 amps with 50 Hz peak single cycle surge current as high as ...more
 |
|
|
Full-featured laboratory DMM with USB port
(7/2/2006)
optional 10 channel scanner card is suited to R&D, scientific and production and service tasks.Available from Westek Electronics Pty Ltd, the Picotest M3500A measures ac and dc voltage, dc and ac current, resistance and temperature for E, ...more
 |
|
|
Compact ultra-low leakage EMC filters
(6/23/2006)
installation and environmental and safety concerns as well as EMC RF-suppression characteristics.Available from Westek Electronics, the Schaffner FN 3025/3026 filters have minimal leakage current from as low as 0.4 milliamp at line voltages of ...more
 |
|
|
Extech 67xx ac power sources
(6/10/2006)
in the series have variable frequency between 45 and 500Hz and output voltages variable between 0 and 300 volt.Westek Electronics ...more
 |
|
|
Voltech PM3000A Three-phase Power Analyser
(6/6/2006)
The Voltech PM3000A three- and single-phase Power Analyser is suitable for the measurement of all phase and line current and voltage parameters, total and displacement power factor, power and energy, comprehensive harmonics for voltage and current as well as short- and long-term flicker in compliance with IEC requirements....more
 |
|
|
Single-phase EMC filters
(6/6/2006)
FN 2030-single stage, and FN 2090 two stage, single-phase EMC filters are available from Westek Electronics in a finely graduated range of currents to suit specific design requirements.The chassis-mounting filters are ideal for a large variety ...more
 |
|
|
Medium voltage capacitors
(5/31/2006)
capacitors are self-healing and are ideally suited for applications including power factor correction.Available from Westek Electronics, the capacitors voltages range from 2.4kV to 11.8kV. They utilise metallised polypropylene film technology, ...more
 |
|
|
Ac/dc liquid resin-filled capacitors
(5/31/2006)
new Electronicon E62 series ac/dc capacitors from Westek Electronics are suited to power electronics applications such as commutation, smoothing and surge discharging, by virtue of their ability to withstand high rms and surge currents.The ...more
 |
|
|
Polyphase electrical power analyser
(3/24/2006)
is a modular system with provision for up to six freely assignable floating analyser channels.Available from Westek Electronics Pty Ltd, the PM 6000 is therefore suitable for power and energy measurement tasks including conversion efficiency ...more
 |
|
|
Precision current shunt
(3/24/2006)
ac/dc power supply, ac/dc electronic load and ac/dc power meter (with suitable ancillary apparatus).Available from Westek Electronics Pty Ltd, the Model 7550 has five precision selectable ultra stable current shunts, which ranges from ...more
 |
|
|
Leakage current breaker tester
(3/22/2006)
of 90 to 400V. The instrument consumes a maximum of 60 VA.The Model 3280 leakage breaker tester is available from Westek Electronics Pty ...more
 |
|
|
Modular power supplies
(2/22/2006)
new Powerstax Multistax power supplies are modular and are easily customised.Available from Westek Electronics Pty Ltd, the basic configuration comprises of either a six-slot, or four-slot mainframe including ac/dc input, EMC filter, resonant ...more
 |
|
|
Credit-card sized power supply
(2/22/2006)
applications such as monitors or pumps and general applications requiring a small power supply.Available from Westek Electronics Pty Ltd, the GSM15 family of 15W ac/dc supplies is offered with 5, 12, 15, 24 and 28Vdc outputs and a wide input ...more
 |
|
|
Invaluable design guide for chokes and filters
(2/3/2006)
comprehensive 300 page design guide for filters and chokes is now available from Westek Electronics.Published by Wurth Elektonik, the book ‘A Trilogy of Inductors’ has been written by three specialist engineers and covers topics such as...more
 |
|
|
Dc electronic load modules
(1/18/2006)
new Prodigit series 33xx electronic loads from Westek Electronics are suited to R&D, workshops and ATE applications.The modular construction permits the housing of up to four individual load modules into a mainframe with GPIB ...more
 |
|
|
IGBT modules
(1/6/2006)
inverters, UPS systems, servo drives, variable speed motor drives, and welding.The modules are available from Westek Electronics in packages including single, six-in-one, chopper, dual, quad and seven-in-one configurations.The modules ...more
 |
|
|
Miniature point-of load dc-dc converters
(1/3/2006)
MxxTG range of DIP24 miniature point-of-load dc-dc converters are available in single or dual output versions from Westek Electronics.The range provides for 1.5W to 8W regulated 4:1 inputs. Plastic or metal case options with voltage input ...more
 |
|
|
Four-wire interference suppression
(12/19/2005)
three-phase/four-wire filters with sufficient attenuation performance play a central role here.Available from Westek Electronics, the FN3280 filters are often employed when the interference levels on three phases and the neutral line need to ...more
 |
|
|
Selective dual band probe
(11/22/2005)
Electronics has released a selective dual band probe for use with the Smart Fieldmeter series of precision omni directional RF field strength instruments, the PI-01V-900/1900.This unique probe covers two GSM bands 925-960MHz and 1805-1880MHz ...more
 |
|
|
High power ac-dc power supply
(11/10/2005)
Electronics has announced the addition of the new MX30 ac-dc programmable power supplies to the very popular MX series with configurations of up to 135kVA.The renowned California Instruments’ MX family now covers single and three phase ...more
 |
|
|
High current isolated mounting base diode
(10/20/2005)
Electronics has released the new Powerex series of POW-R-BLOK, very high current isolated mounting base diode and SCR modules in single or dual configurations.Current ratings of up to 2500A with voltage ratings up to 4400V are possible, due to ...more
 |
|
|
Handheld RF spectrum analyser
(10/5/2005)
Electronics has released the Bantam Instruments model 401B personal spectrum analyser. It is suited to EMC precompliance testing for a range of radio frequency applications such as wireless LANs and modems and paging systems.The user selects ...more
 |
|
|
Electronicon Power Electronic Capacitors
(9/12/2005)
Electronicon capacitors are ideally suited to demanding power electronics applications such as commutation, filtering, smoothing and surge discharging by virtue of their ability to withstand high RMS, peak and surge currents....more
 |
|
|
Automotive immunity testers
(9/3/2005)
represented in Australia by Westek Electronics, has introduced three immunity testing systems suitable for various ISO and SAE compliance regimes. The NSG 5500/5600 systems provide an economical solution by way of modular plug-in generators ...more
 |
|
|
Dv/dt reactor protects motors
(8/7/2005)
Electronics has released the MTE Series A dv/dt filters, designed to protect ac motors from the destructive effects of peak voltages typical of long cable runs between the inverter and motor.The MTE dv/dt filter meets its maximum peak motor ...more
 |
|
|
Common-mode suppressing inductors
(8/6/2005)
represented in Australia by Westek Electronics, has released common mode suppressing inductors that cover applications including USB ports, Firewire/IEEE 1394 configurations, LAN, PBX, PCs, power supplies, industrial buses, audio and video ...more
 |
|
|
Magnetic field tester for power frequencies
(7/3/2005)
new Schaffner model MFO 6501 magnetic field testing device, available from Westek Electronics, provides for power frequency testing in accordance with EN/IEC 61000-4-8 and 61000-4-9.The device is comprised of a programmable low impedance power ...more
 |
|
|
High current SCR module
(6/10/2005)
represented in Australia by Westek Electronics Pty Ltd, has launched the unique PS43xx15 family of single SCR, 1800V isolated modules.With a footprint of only 101.6mm x 198.1mm, a very high current of 1500A is achieved with low thermal ...more
 |
|
|
15MHz sweep/function generator
(5/5/2005)
Electronics has released the Motech model FG708S and F function generators, providing a large number of waveforms including triangular, square, sine wave, pulse and dc signals in the frequency range of 0MHz to 1MHz.In the pulse output mode, ...more
 |
|
|
Handheld RF spectrum analyser
(5/5/2005)
Electronics has released the Bantam Instruments model 401B personal spectrum analyser. It is suitable for EMC precompliance testing for a range of radio frequency applications including wireless LANs and modems and paging systems.Field ...more
 |
|
|
High current SCR isolated modules
(4/11/2005)
represented in Australia by Westek Electronics Pty Ltd, has released the unique PS43xx15 family of single SCR, 1800V isolated modules.With a footprint of only 101.6mm x 198.1mm, a very high current of 1500A is achieved with low thermal ...more
 |
|
|
Sine wave filters for PWM equipment
(3/16/2005)
new MTE series A sine wave filters from Westek Electronics are suited to service as output filters for variable speed drives, UPS systems, and other PWM equipment with switching frequencies between 2kHz and 8kHz.The MTE filters can also be ...more
 |
|
|
Ferrite beads solve EMI problems
(3/14/2005)
Wurth Elektonik, represented in Australia by Westek Electronics, offers a range of ferrite beads to solve EMI problems. The products include the CBF series of seven basic frequency response characteristic groupings with impedance curves to 2GHz. It...more
 |
|
|
Interposing EMC filters for D-connectors
(3/5/2005)
Electronics has released D-SUB-Filter adaptors, a ready-made solution for minimising cable-transmitted RF interference. Equipped with an internal PCB-mounted 1000pF capacitor, the adaptors are available in executions from nine to 37...more
 |
|
|
Ferrite beads solve EMI problems
(2/6/2005)
Wurth Elektonik, represented in Australia by Westek Electronics, has released a range of ferrite beads that solve EMI problems. The products range from the CBF series comprised of seven basic frequency response characteristic groupings with impedance...more
 |
|
|
Sinusoidal output filter for inverters
(8/1/2004)
Electronics now has the new Schaffner FN 5010 sinusoidal output filters intended for variable speed drive outputs.The use of the FN 5010 has many advantages including smoother running of motors by almost eliminating counter-phase harmonics, ...more
 |
|
|
Economical, programmable dc power supplies
(8/1/2004)
Electronics has released the Array Electronics 3600 series of three benchtop dc power supply models with flexible keypad and rotary controls as well as computer interface via RS232 or RS485.Windows-based operational software on a CD is ...more
 |
|
|
Field strength measurement meter
(7/10/2004)
Electronics has released the Smart Fieldmeter, suitable for field strength measurements in applications including AM and FM radio stations, TV stations, cellular telephony, industrial apparatus and EMC testing.Field strength measurement can be ...more
 |
|
|
Attenuator and pulse suppressor for EMC testing
(6/25/2004)
of these components to the receiver.The new AFJ model PAT20 pulse limiter and precision attenuator, available from Westek Electronics, overcomes this vexing problem.The AFJ PAT20 consists of diode limiter and low pass compensation sector ...more
 |
|
|
Dc power supply and load unit
(6/23/2004)
new Motech PPS-120X GSM series dual channel dc source/current sink power supply/loads available from Westek Electronics are suitable for testing mobile phone and other battery operated equipment.They are especially suitable for systems ...more
 |
|
|
Crystal oscillators
(6/21/2004)
Electronics has introduced a new series of crystal oscillators, SAW filters, and resonators from Aker Technology.They cover applications including PCMCIA cards, wireless LANs, Bluetooth, cellular telephony, cable repeaters, ADSL and XDSL, ...more
 |
|
|
Versatile power supply tester
(6/17/2004)
new Prodigit model 3610A power supply tester available from Westek Electronics is suited to the testing of power supplies with inputs of 115 and 230 V ac, and various ratings to 300 watt and voltages to 60 volts.The Prodigit 3610A is therefore ...more
 |
|
|
Power line analysis seminars
(6/8/2004)
Electronics will run a half-day seminar on power line analysis in both Melbourne (21 September) and Sydney (23 September).The thrust of the seminar program will be the accurate measurement of power, transients and harmonics in poly-phase ...more
 |
|
|
Power sources
(5/17/2004)
Instruments, represented in Australia by Westek Electronics, has released the LS series of ac power supplies, available with single and three-phase ac output.They are designed for industrial, avionics, and defence applications. Output power ...more
 |
|
|
EMC-conformance chokes and filters
(5/13/2004)
RFI-suppression filtering, chokes, feed-throughs, harmonic suppression reactors and filters, available from Westek, provide a complete spectrum of solutions for challenging electrical and electronic environments.Filters, chokes, capacitors and ...more
 |
|
|
Product testing power source
(4/6/2004)
Instruments, represented by Westek Electronics, has released the LX series of ac power supplies with three-phase ac output. They incorporate PWM switching technology, a high power to weight ratio, and high efficiency performance.The power ...more
 |
|
|
RF power amplifiers
(2/16/2004)
new Ophir model 5037 class A/AB Radio Frequency power amplifier from Westek Electronics is ideally suited to immunity and automotive testing as well as other CW duties.The amplifier covers the bandwidth range from 200MHz to 1000MHz. The 5037 ...more
 |
|
|
15MHz sweep/function generator
(2/6/2004)
new Motech model FG515 function generator, available from Westek Electronics, provides a range of waveforms including triangular, square, and sine wave, swept linearly or logarithmetically in the signal frequency range from 0.2Hz to 15MHz.A ...more
 |
|
|
Split core and through-hole dc and ac current transducers
(1/13/2004)
new Powertek Hall-effect split core and through-hole current transducers are available from Westek Electronics as dc and rms-indicating (500 and 1000 amp) configurations.The Powertek transducers are easily adapted to a variety of installation ...more
 |
|
|
Capacitors for high voltage and currents
(1/13/2004)
new Alcon range, available from Westek Electronics, is a series of self-healing, aluminium foil/polypropylene dielectric capacitors suitable for high voltage, high current, and high dv/dt applications. These include IGBT protection, snubber ...more
 |
|
|
Dimmerstat Voltage Controls
(1/12/2004)
The Automatic Electric Dimmerstat continuously variable auto-transformers are the World's most reliable, proven technology to deliver efficient, smooth, and continuous voltage control whatever the application....more
 |
|
|
RF class AB power amplifier
(8/5/2003)
new Ophir model 5074 RF class AB power amplifier from Westek Electronics has a bandwidth from 30 to 512MHz, covering the military VHF/UHF bands, and is suited to applications including EW and satellite communications.Minimum linear output is ...more
 |
|
|
Microwave SAR-applicable power amplifiers
(8/5/2003)
new Ophir model 5140/50/60 class A/AB power amplifiers, from Westek Electronics, cover the bandwidth range from 700 to 4200MHz, depending on the model chosen.The amplifiers are suitable for the calibration of Specific Absorption Rate (SAR) ...more
 |
|
|
EFT pulse calibrated attenuator
(7/5/2003)
new Schaffner CAS 3025 burst/EFT pulse calibrated attenuator from Westek Electronics can be used in conjunction with oscilloscopes to enable verification of EMC burst and pulse generators.The CAS 3025 meets the requirements of IEC/EN61000-4-4 ...more
 |
|
|
High voltage differential probe
(7/5/2003)
new Schaffner MD200 high voltage differential probe, available from Westek Electronics, is suitable for the verification of voltage surge pulse outputs from EMC test generators.The probe is an essential calibration tool for test generators ...more
 |
|
|
GTEM cell power amplifiers
(6/5/2003)
new Ophir model 5039 class A/AB power amplifier, available from Westek Electronics, is suited to GTEM cell immunity testing. The amplifier covers the bandwidth range from 20 to 1000 MHz.A second amplifier, the Ophir model 5150 covers the ...more
 |
|
|
Advanced lab device programmer
(6/5/2003)
new PowerLab programmer with USB interface from Westek Electronics represents a non-compromising marriage of universality, flexibility, reliability, productivity and affordability.The promise of universality is fulfilled through the wide range ...more
 |
|
|
Up-link solid-state amplifier
(6/5/2003)
new Ophir model 4012 class A/AB solid-state power amplifier with 250 watt saturated power output, available from Westek Electronics, is designed for UHF satellite communications in the frequency range of 290 to 320MHz.The Ophir 4012 has ...more
 |
|
|
EMC immunity test system
(4/23/2003)
new Schaffner Modula EMC immunity test system from Westek Electronics is an open-architecture solution to flexible testing.Modula offers Interbus compatibility; Ethernet (TCP/IP) communication; compact test generators; and multi-function ...more
 |
|
|
High power dc power supplies
(2/5/2003)
Electronics announces the release of California Instruments’ latest release of high power, high accuracy dc power supplies, the Argantix series.The Argantix XDS power supply system series covers the basic power output ranges of 5kW, 10kW and ...more
 |
|
|
IEC compliance testing equipment
(9/20/2002)
(voltage dips), IEC 61000-4-17 (dc ripple) and IEC 61000-4-28 (frequency variations).The MXCTS, available from Westek Electronics, offers pre-compliance testing to IEC 61000-4-11 (voltage dips and variations), IEC 61000-4-27 (three-phase ...more
 |
|
|
Electrostatic discharge simulator gun
(7/23/2002)
Schaffner model NSG 438 electrostatic discharge gun from Westek Electronics is suited to immunity testing to European norms.The testing system is therefore practically obligatory for manufacturers and designers of equipment destined for Europe ...more
 |
|
|
Surge and lightning protection
(8/8/2001)
range of lightning and surge protection devices is now available through sole Australian distributor, Melbourne-based Westek Electronics.Zymax protection devices cover low load 200mA dc systems, operating from 6 to 75 volts, and single or ...more
 |
|
|
EMC compliance testing made easy
(6/20/2001)
to any other additional equipment required for EUT monitoring or control as well as mast and turntable controllers. Westek Electronics 03 9369 ...more
 |
|
|
Surge protector protects itself
(3/7/2001)
UK manufacturer of surge protection devices and developer of the MMOV, has appointed Melbourne company Westek Electronics sole regional distributor.The MMOV is designed to remove the main limitation of MOVs (metal oxide varistors) commonly ...more
 |
|
|
Westek appointed sole regional distributor
(3/7/2001)
Westek Electronics has been appointed the sole regional distributor for UK surge protection manufacturer Zymax’s products in the Pacific Rim, including the MMOV.The MMOV solves the problem in surge protection devices of users having little ...more
 |
|
|
California Instruments MX Series AC/DC Power Source
The MX Series Power Source range from California Instruments offers high levels of AC and DC power in a relatively compact floor standing cabinet. Available in power levels starting at 15 kVA, the MX Series Power Source represents the most versatile AC/DC power system available today....more
 |
|
|
Picotest M3500A 6.5 Digit Multimete
The Picotest M3500A 6.5 Digit Multimeter with USB port and optional 10 channel scanner card is suited to R&D, scientific as well production and service tasks. Very importantly, the Picotest M3500A 6.5 Digit Multimeter is equipped with USBTMC compliant port....more
 |
|
|
|
|
|