Line Reactors for Single Phase Loads
REACTORS FOR SINGLE PHASE APPLICATIONS
MTE three-phase Line / Load Reactors ( RL or RLW) can be used for single-phase applications by connecting two supply conductors through an outside coil, and leaving the centre coil disconnected. For the drive input application shown in (Figure below), the incoming supply lines connect to terminals A1, C1, and outgoing lines from A2, C2. The “B” terminals for the centre coil are not connected. The sum of the inductance of the two coils is the total inductance applied to the circuit.
The illustration below demonstrates how a 3-phase line reactor can be used for a single-phase application.