EMI Receivers & LISN’s by PMM




PMM began as a small one man Company in Italy back in 1968 manufacturing filters antenna amplifiers. Today, PMM are world leaders in EMC Measurement instrumentation and are part of the American Company Narda, a branch of L3 Communication.

PMM 9010F EMI/EMC Receiver, new model with extremely fast sweep
The new EMI Receiver PMM 9010F is based on very advanced analogue to digital conversion and data processing technology that applies the FFT frequency spectrum analysis in full compliance with all the tests required by the standard CISPR 16-1-1.

CISPR detectors such as the Q-Peak, C-RMS and C-AVG detectors are characterized by a long settling time: measurements must be performed with a long observation time (hold time) of 1 – 2 seconds for each frequency step; setting hold times lower than 1s can reduce the test time but at the cost of possible severe errors and under-estimation of the levels.
PMM 9010F overcomes this limitation by scanning the entire spectrum in less than 25 seconds with hold time of 1 second and for all detectors, instead of several 5 hours.


Features include:

EMI Receivers & LISN - PMM | Westek

FFT Time Domain Digital EMI Receiver & Real time Analyzer
FFT-based, gapless EMI receiver & Analyzer, 10 Hz – 30 MHz
Full compliance to CISPR 16-1-1
Reduces test time from hours to seconds
Real-time spectrum analysis
Rugged, light weight, small size, internal battery for best portability
User-friendly in stand-alone and with the powerful PMM Emission Suite

Expandable to higher frequencies as below:
9030 Extension unit 30 MHz – 3 GHz, full compliant to CISPR 16-1-1
9060 Extension unit 30 MHz – 6 GHz, full compliant to CISPR 16-1-1
9180 Extension unit 6 GHz – 18 GHz, full compliant to CISPR 16-1-1

For more information contact us or click on the clink below to download the PMM 9010F brochure.
Download PDF Enquire Now

PMM 9010/30P EMI Measuring Receiver & Analyzer 10 Hz – 300MHz/3GHz/6GHz/18GHz
The PMM 9010 state-of-the-art full compliance 30 MHz EMI Digital Receiver is the platform of the system. Based on direct Analogue to Digital conversion and sophisticated computation, it offers calibration-free operation on almost all of its key components, i.e. RBW filters, detectors, demodulation… while the RF front-end is self-calibrated by the internal, precise RF signal generator.
All the units are uniquely compact and lightweight: the low frequency unit (PMM 9010) is about 4.1 kg and the high frequency extensions are about 2 kg.
All are battery operated making them ideal for field use as well as inside the lab.

9010/03P EMI Receiver 10Hz-300MHz

EMI Receivers & LISN from PMM
9010/30P EMI Receiver 10Hz-3GHz
9010/60P EMI Receiver 10Hz -6GHz
9180 Extension unit for EMI Receiver 6GHz -18GHz

Features include:
Frequency ranges from 10 Hz to 30 MHz; 3 GHz; 6 GHz; 18GHz.
Full compliance with the latest edition of CISPR 16-1-1 standard, including RMS-AVG detector, APD function, click measurements, etc.
Commercial and military standards met within the frequency range
CISPR and MIL-STD RBW filters
Integrated preamplifier (all units) and pulse limiter (only PMM 9010).
Mostly maintenance and calibration free; service done in minutes.
Excellent RF characteristics.
Built-in tracking signal generator up to 30 MHz (PMM 9010).
Multimode functions: sweep, spectrum analyzer, scalar network analyzer, manual receiver.
Smart Detector: a “productivity booster” feature specifically designed to dramatically improve test speed.

For more information contact us or click on the clink below to download the PMM 9010/03P brochure.
Download PDF Enquire Now

9010 EMC/EMI Receiver 10Hz – 30 MHz Fully CISPR-Compliant expandable to 18 GHz
The PMM 9010 is a CISPR Compliant EMI Receiver capable of measurements in the 10Hz to 30MHz frequency range. Based on direct Analogue to Digital conversion and sophisticated computation, it offers calibration free operation on almost all of its key components, i.e. RBW filters, detectors, demodulation… while the RF front-end is self-calibrated by the internal, precise RF signal generator.
The 9010 EMI Receiver weighs just 4.1 kg and the high frequency extensions are about 2 kg. All are battery operated making them ideal for field use as well as inside the lab.

The platform is the 9010 EMI Receiver with frequency range from 10 Hz to 30 MHz

9010 EMI Receiver with frequency range from 10 Hz to 30 MHz
Additional RF modules extend frequency range as below
9030 adds frequency range 30MHz-3GHz
9060 adds frequency range 30MHz-6GHz
9180 adds frequency range 6GHz-18GHz

Full compliance with the latest edition of CISPR 16-1-1 standard, including RMS-AVG detector, APD function, click measurements, etc.
Commercial and military standards met within the frequency range
CISPR and MIL-STD RBW filters.
Integrated preamplifier (all units) and pulse limiter (only 9010).
Mostly maintenance and calibration free; service done in minutes.
Excellent RF characteristics
Built-in tracking signal generator up to 30 MHz (9010).
Multimode functions: sweep, spectrum analyzer, scalar network analyzer, manual receiver.
Smart Detector: a “productivity booster” feature specifically designed to dramatically improve test speed.

For more information contact us or click on the clink below to download the PMM 9010 brochure.
Download PDF Enquire Now

7010 All-in-one EMI Receiver 150 kHz – 1 GHz pre compliant EMI Receiver & LISN

EMI Receiver PMM 7010
The new EMI Receiver PMM 7010 matches the legendary operability of all PMM receivers with the most advanced digital technology and with the completeness of the PMM Emission Suite software.
Specifically designed for reliable EMC pre-testing and debugging, the PMM 7010 helps reducing the time-to-market of new products.
The 7010 Pre-Compliant EMI Receiver is also very cost effective.

For more information contact us or click on the clink below to download the PMM 7010 brochure.
Download PDF Enquire Now

PMM Emission Suite Software
The PMM Emission Suite comes with PMM EMI receivers for user-friendly operation as never seen before:
Full control of all auto and manual Receiver functions

PMM Emission Suite Software
Real-time display on PC
One-click operating mode change : Scan/Sweep, Analyzer, Manual
Import and creation of Limits
Import and creation of Correction Factors Tables for ancillary equipment (antennas, cables etc.)
Retrieve, save, recall and compare measurements
Simultaneous Marker on all Detectors and Zoom
“n” Highest Peaks Finder and Scan Table generation
Measured LISN lines scrolling by mouse wheel
Functions specific to Lighting Equipment (IEC/EN55015, IEC62493)
2D – 3D Waterfall and time analysis (option)
GTEM correlation to OATS (for radiated measurements)
Warning messages for incorrect settings
Report generation
Import-export of complete measurements
Mast-table control (option)

L2-16B Single-phase LISN (Line Impedance Stabilization Network)
The PMM L2-16B single phase LISN (Line Impedance Stabilization Network) can be used in conjunction with any EMI Receiver or Spectrum Analyzer.
Features:
9 kHz – 30 MHz frequency range


16 A max output current
Large baseplate for optimal grounding
Built-in, selectable, 150 kHz high pass filter
Artificial Hand circuit
Local and remote control for PMM EMI receivers
Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15

For more information contact us or click on the clink below to download the L2-16B LISN brochure.
Download PDF Enquire Now

L3-32 3-phase LISN (Line Impedance Stabilization Network)
The PMM L3-32 3-phase LISN (Line Impedance Stabilization Network) 32 A can be used in conjunction with any EMI Receiver or Spectrum Analyzer.
Features:
9 kHz-30 MHz frequency range


32 A max output current
Large baseplate for optimal grounding
Built-in, selectable, 150 kHz high pass filter
Artificial Hand circuit
Local and remote control for PMM EMI receivers
Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15
For more information contact us or click on the clink below to download the L3-32 LISN brochure.
Download PDF Enquire Now

L3-64 3-phase LISN (Line Impedance Stabilization Network)
The PMM L3-64 3-phase LISN (Line Impedance Stabilization Network) 63A can be used in conjunction with any EMI Receiver or Spectrum Analyzer.
Features:
9 kHz – 30 MHz frequency range


63 A max output current
Large baseplate for optimal grounding
Local and remote control for PMM EMI receivers
Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15
For more information contact us or click on the clink below to download the L3-64 LISN brochure.
Download PDF Enquire Now

L3-100 3-phase LISN (Line Impedance Stabilization Network)
The PMM L3-100 3-phase LISN (Line Impedance Stabilization Network) 100A can be used in conjunction with any EMI Receiver or Spectrum Analyzer.
9 kHz – 30 MHz frequency range


100 A max output current
Large baseplate for optimal grounding
Local and remote control for PMM EMI receivers
Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15
For more information contact us or click on the clink below to download the L3-100 LISN brochure.
Download PDF Enquire Now

L1-150M Multi-standard Single-path LISN (Line Impedance Stabilization Network) 0.1-200MHz
PMM L1-150M is a single-path LISN (Line Impedance Stabilization Network) designed to


be easily used for conducted disturbances measurements according to different
standards for Automotive and ISM (Industrial, Scientific, Medical) applications:
CISPR 16-1-2
CISPR 25 / ISO 11452-4
ISO 7637-2
Features:
Multi-standard design
0.1 to 200 MHz frequency range
150 A max output current
Large baseplate for optimal grounding
Robust, compact construction
Screw terminals for safe wiring
For more information contact us or click on the clink below to download the L1-150M LISN brochure.
Download PDF Enquire Now

L1-500 Single-path LISN (Line Impedance Stabilization Network) 9KHz – 30MHz
L1-500 is suitable for measurement on power circuits from DC to 60 Hz. The equivalent V-Network circuit is fully compliant with the reference standards. PMM Artificial Main Networks provide robust and stable mechanical construction, high quality electric components, easy and perfect grounding, solid input-output power connections. They can be used in conjunction with any EMI receiver or spectrum analyzer and offer the features required for safe, repeatable and accurate measurements.

Features:
9 kHz – 30 MHz frequency range
Up to 300 A (continuous); 500 A (20 min.) rated output current
Suitable for DC to 60 Hz power lines
Built-in, selectable 250 µH coil (Choke)
Screw terminals for safe wiring
Meets the requirements of several standards including CISPR 16-1-2, VDE 0876, FCC part 15
Fan air cooling
For more information contact us or click on the clink below to download the L1-500 LISN brochure.
Download PDF Enquire Now