| |
|
Released: 11/06/2009
The new ReFlex Power™
AC/DC power and load system from Elgar is a
modular array of plug-and-play AC and DC
power supplies as well as DC electronic
loads, and is LXI-based to permit
intelligently controllable testing systems
for a wide range of applications including
avionics such as burn-in and testing
hardware, automotive sub-system testing,
process control in areas including control
of electrolytic plating, and R&D.
The ReFlex Power™
AC/DC power and load system comprises of
12-module mainframes each equipped with a
fast proprietary communication bus. A single
unit-width controller, the RFP, controls
and monitors all units in the mainframe. The
controller is capable of controlling and
monitoring up to eight mainframes. Thus a
testing system can comprise of an array of
as many as 95 modules of power sources and
electronic loads. The RFP™
controller communicates with its host via
LXI (LAN eXtensions for Instrumentation),
and using ReFlex Power™
software, is able to flexibly configure
customized topologies of series and parallel
source and load combinations. In addition
virtual outputs comprising of
series-parallel configurations can be
created thus, in effect, creating an
expanded testing environment.
The full range of ReFlex Power™
modules includes DC supplies with maximum
output voltages from 16 Volt to 450 Volt and
output powers from 330 Watt to 1 Kilowatt,
and AC supplies with output voltages of 140
Volt and 280 Volt (875 VA rating), as well
as 500 Volt DC loads capable of sinking up
to 15 Amps and 30 Amps. The AC supplies are
capable of handling highly non-linear loads
with crest factors to 4.8:1, and with
frequencies from 45 Hz to 5000 Hz.
ReFlex Power™
mainframe and modules are rated to Class 3
Mil-PRF-28800F for shock and vibration
making them ideal for Defense applications.
<< Click here to
contact us regarding this product >> |
